Halfshaft Flange, Limited-Slip Differential

Sealing ring for limited-slip differential -- Removing and installing halfshaft flange




Tool




Components

Note: The sealing rings can also be replaced with the transmission installed.

Removal





1. Unscrew fastening screw for halfshaft flange and pull out halfshaft flange.
2. Lever out sealing ring using a suitable tool.

Installation





1. Fill the space between the dust and sealing lips with grease (e.g. Liqui - Moly) and drive in the sealing ring up to the mounting face using special tool 9252.
2. Tighten the fastening screw for the halfshaft flange with 44 Nm (33 ft. lbs.).