Test Point 5

Fault, Fault Codes 44,45,46,50 Test Point 5

Buckle, driver

Possible causes, elimination, notes

NOTE: Only on USA vehicles.

1.Disconnect the plug connection X16.
2. Connect ohmmeter on the pin side on pins B7 and B8. Display: approx. 400 Ohms Note The belt tongue must not be inserted in the buckle.
3. Connect ohmmeter on the pin side on pin B7 and ground. Display: Infinite Ohms.
4. Connect ohmmeter on the pin side on pins B7 and B8. Insert the belt tongue in the buckle. Display: approx. 100 Ohms.
5. Inspect the wiring harness to the triggering unit for pinches and chafing damage.