Test Point 6

Fault, Fault Codes 47,48,49,51 Test Point 6

Buckle, passenger

Possible causes, elimination, notes

NOTE: Only on USA vehicles.

1. Disconnect the plug connection X17.
2. Connect ohmmeter on the pin side on pins B7 and B8. Display: approx. 400 Ohms.

NOTE: The belt tongue must not be inserted in the buckle.

3. Connect ohmmeter on the pin side on pin B7 and ground. Display: Infinite Ohms.
4. Connect ohmmeter on the pin side on pins B7 and B8.
Insert the belt tongue in the buckle. Display: approx. 100 Ohms.
5. Inspect the wiring harness to the triggering unit for pinches and chafing damage.