Disassembling/Assembling Engine

Disassembling and assembling engine

Overview of working positions

The topic Disassembling and assembling engine includes the following items:

- Item 1 Removing and installing intake distributor
- Item 2 Removing and installing drive belt
- Item 3 Removing and installing deflection rollers and tensioning roller for drive belt
- Item 4 Removing and installing oil pump with coolant guide housing
- Item 5 Removing and installing oil pan with partition box, air/oil separator and oil suction pump
- Item 6 Removing and installing camshafts
- Item 7 Disassembling and assembling cylinder head
- Item 8 Disassembling and assembling crankcase
- Item 9 Removing and installing pistons
- Item 10 Removing and installing intermediate shaft on bearing housing
- Item 11 Disassembling and assembling bearing housing with crankshaft

Intake distributor, drive belt, deflection rollers and tension rollers





- Item 1 Disassembling and assembling intake distributor
- Item 2 Removing and installing drive belt
- Item 3 Removing and installing deflection rollers and tensioning roller for drive belt

Coolant guide housing with oil pump, oil pan with partition box, air/oil separator and oil suction pump





- Item 4 Removing and installing coolant guide housing with oil pump
- Item 5 Removing and installing oil pan with air/oil separator (swirl pots) and oil suction pump

Camshafts, cylinder head, crankcase halves





- Item 6 Removing and installing camshafts
- Item 7 Disassembling and assembling cylinder head
- Item 8 Disassembling and assembling crankcase halves

Pistons, intermediate shaft, bearing housing





- Item 9 Removing and installing pistons
- Item 10 Removing and installing intermediate shaft on bearing housing
- Item 11 Disassembling and assembling bearing housing with crankshaft