Instrument Panel Bulb: Service and Repair

Removing And Installing Bulb For Instrument Cluster

Removal

INFORMATION: 1.2 and 1.5 watt bulbs can be removed and installed without opening the rear side of the instrument cluster.

1. Removing and installing instrument cluster:







2. Undo the bulb holder with a small screwdriver (bayonet lock).
3. Take out the faulty bulb. The bulb and bulb holder make up one spare part.







INFORMATION: If the instrument cluster is open, interior 1.5 and 3 watt bulbs can be removed from and installed in the display unit in the same order of procedure. Disassembling and assembling instrument cluster.

Installation
1. Install a new bulb (bayonet lock).
2. Assemble or install the instrument cluster and perform a function test.