Operation CHARM: Car repair manuals for everyone.
Home >> Porsche >> 2004 >> 911 Carrera 4S (996) F6-3.6L >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Differential >> Service and Repair >> Procedures >> Removing and Installing Long Flanged Shaft (As of MY 2002) >> Removing Long Flanged Shaft

Removing Long Flanged Shaft

Removing long flanged shaft
1. Remove left rear wheel.
2. Remove left drive shaft.
3. Unscrew fastening screw for the water hose holder on the mounting saddle.





4. Unscrew fastening screws for the mounting saddle with a Torx socket wrench 9330.
5. Carefully pull out flanged shaft.

pro multis · About Operation CHARM