Installing Cylinder Head

WM 157023 Installing cylinder head

Tools








Installing cylinder head

1. Fit cylinder head gaskets.

Information
^ The gaskets are identified by Zyl. 1 - 3 or Zyl. 4 - 6 with OBEN/TOP, plus the corresponding part number.





Ensure correct seating of dowel sleeves in crankcase. Put on gaskets.





2. Fasten cylinder heads. Moisten cylinder-head screws thinly with engine oil.














Diagram shows torque-angle tightening with 60 degrees

3. After tightening the cylinder-head screws, additionally fasten four pan-head screws M6 x 35 (10.9) (with captive washers) in the area of the chain box. Tightening torque 13 Nm (10 ftlb.)