Mechanical Specifications

Mounting saddle for flanged shaft to transmission
Thread M8 23 Nm (17 ftlb.)
Drive shaft on flanged shaft
Thread M10 81 Nm (60 ftlb.)
Holder to mounting saddle
Thread M6 10 Nm (7.5 ftlb.)
Stabilizer to carrier side section
Thread M8 23 Nm (17 ftlb.)
Stabilizer to stabilizer mount
M10 46 Nm (34 ftlb.)
Short flanged shaft to transmission
Thread M10 46 Nm (34 ftlb.)

Long-neck pipe to final drive (M8 x 36) = 25 Nm (19 ftlb.)
Front transmission support to final drive (M10) = 65 Nm (48 ftlb.)
Oil drain plug on final drive (M18 x 1.5) = 28 Nm (21 ftlb.)