Mechanical Heating and Fresh-Air Control Assembly

Note: This procedure is applicable to vehicles with heating/ventilation system only. For vehicles with air conditioning, refer to Electronic Climate Control Panel.

Removal







1. Carefully unclip baffle from the heating and fresh-air control.
2. Unscrew fastening screws (4 ea.) and pull control module out of the dashboard.
3. Pull off electrical plug connections. Unclip Bowden cables and pull out upwards or detach cables. Label Bowden cables before removal.

Installation
1. Clip in Bowden cables and route carefully (do not bend).
2. Engage electrical plug connections: do not jam cables.