Rear Door Window Regulator: Service and Repair

Removing And Installing Rear Power Windows

Preliminary work

1. Remove rear door sub-frame
1.1. Refer to Removing and installing door sub-frame.

2. Remove rear door window
2.1. Refer to Removing and installing rear door window.

3. Remove rear power window motor
3.1. Refer to Removing and installing rear power window motor.

Removing rear power windows







1. Removing power windows
1.1. Drill out pop rivets -1- on guide rails -2-.
1.2. Unclip power window gear -3- from the door unit carrier and remove the power window.







Installing rear power windows







1. Installing power windows
1.1. Place the power window on the door unit carrier as shown. Make sure the cable is in the correct position ( -arrow A- ).







1.2. Clip in power window gear -3- in the door unit carrier.
1.3. Fix guide rails -2- with 2 rivets each -1- and rivet with the door unit carrier.
1.4. Clip in cable to retaining clip -4-.
1.5. Apply lubricant (grease) to the guide rails -2- and move sliding pads -5- manually.







Subsequent work

1. Install rear door window
1.1. Refer to Removing and installing rear door window.

2. Install rear power window motor
2.1. Refer to Removing and installing rear power window motor.

3. Install rear door sub-frame
3.1. Refer to Removing and installing rear door sub-frame.