Doors, Hood and Trunk: Service and Repair

Replacement Lids and Doors

Vehicle Type: 911 Carrera (996), 911 Carrera 4 (996)

Model Year: As of 1999 (X)

Concern: Seam sealing new replacement lids and doors before painting.

Information: The new replacement lids and doors are manufactured and delivered without seam sealer. The seams of the lids and doors must be sealed against corrosion with sealant, part number, 000 043 204 38 prior to painting.

NOTE: Please make sure your body shop receives a copy of this information.

Parts Information:

Part Number Description
000 043 204 38 Seam sealer, 70ml

Important Notice: Porsche Cars N.A Technical Bulletins are intended for use by professional technicians, not a "Do-it-yourselfer". They are written to inform these technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Special tools may be required to perform certain operations identified in these bulletins. Use of tools and procedures other than those recommended in these bulletins may be detrimental to the safe operation of your vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your Porsche Dealer for information on whether your vehicle may benefit from the information. Part numbers listed in these bulletins are for reference only. Always check with your authorized Porsche dealer to verify correct part numbers.