Removing and Installing Microswitch For Convertible-top Compartment Lid

Removing And Installing Microswitch For Convertible-top Compartment Lid







Removing microswitch for convertible-top compartment lid
1. Move convertible top to service position.
2. Remove cover over the engine To loosen the carpet, pull out the plastic clips with the special tool 21 and fold back the carpet over the microswitch.
3. Removing microswitches
Disconnect electrical plug connection -4-. Press locking tab and push the plug connection down and out.
Undo fastening screw -1- and lift the retaining bracket -2- with microswitch up and out.
Remove both tab washers -3- and take out the microswitch.







Installing the microswitch for convertible-top compartment lid
1. Installing microswitch
Fasten microswitch on the retaining bracket -2- with tab washers -3- and install.
Engage electrical plug connection -4- and perform a function test.
2. Lay carpet over the microswitch
Fold the carpet forward again and fasten with the plastic clips.