Input Signals

Input Signals

The following queries can be run using this menu item:
- Signal, reverse gear navigation unit

NOTE: Deactivate the 'automatic traffic announcement' before performing the diagnosis on the PCM2. If this is not done, the diagnosis will abort.

Menu item Function

- Reverse-gear signal The reverse-gear signal can be read out using this menu item.
- Connect and start the 9588 Porsche System Tester II and switch on the ignition.
- Select '911 (996)' in the Vehicle type menu and confirm with the [>>] key.
- Select 'PCM2' in the Control units menu and confirm with the [>>] key.
- Select 'Navigation' in the 911 (996) PCM2 function selection and confirm with the [>>] key.
- Select 'Input signals' in the 911 (996) Navigation function selection and confirm with the [>>] key.
- Select 'Reverse-gear signal' in the 911 (996) Navigation input signals function selection and confirm with the [>>] key.
- Read out values from the display field.