Operation CHARM: Car repair manuals for everyone.
Home >> Porsche >> 2004 >> 911 GT2 (996) F6-3.6L Turbo >> Repair and Diagnosis >> Accessories and Optional Equipment >> Collision Avoidance and Parking Assist Systems >> Testing and Inspection >> Programming and Relearning

Programming and Relearning





Note:
- This function is only available in vehicles with seat memory.
- Activation/deactivation can take place with/without PST 2.


General
The automatic lowering of the passenger door mirror aids the driver during parking maneuvers. After a time delay which can be set, the door mirror is lowered by the set value as soon as reverse gear is engaged. If reverse gear is disengaged again or the mirror adjustment switch touched with reverse gear still engaged, the door mirror returns to its stared position.
The following settings can be selected from the menu and encoded using the PST 2:
- Parking aid (activated or deactivated)
- Parking aid with door mirror (right or left)
- Lowering

Activating The Parking Aid Without PST 2
1. Switch ignition on.
2. Engage reverse gear.
3. Adjust both door mirrors to desired positions.
4. Adjust seat to desired position.
5. Save seat position.
- Press M and corresponding seat memory position 1, 2, or 3 simultaneously.

Note:
- The parking aid is activated for the respective seat position saved.
- Activation of the parking aid must be carried out individually for every seat position.

Deactivating The Parking Aid Without PST 2
1. Switch ignition on.
2. Disengage reverse gear if necessary.
3. Adjust both door mirrors to desired positions.
4. Adjust seat to desired position.
5. Save seat position.
- Press [M] and corresponding seat memory position [1], [2] or [3] simultaneously.

Note: The parking aid is now deactivated for the respective seat position.

Activating The Parking Aid With PST 2
1. Connect the PST2 with the ignition off, then switch the ignition on.
2. Switch on the PST2 and wait for the start-up screen.
3. Press the [>>] key to the next level.
4. Select the vehicle type 911 (996) Turbo in the left-hand window using the [down arrow] key.
5. Press the [-->] key to activate the right-hand window.
6. With the [down arrow] key, select the Seat memory control module and press the [>>] key to the next level.
7. With the [down arrow] key, select Modify coding and press the [>>] key to the next level.
8. With the [down arrow]/[up arrow] key, select the menu item -Parking aid for position 1- or -Parking aid for position 2- or -Parking aid for position 3-.
9. Press the [>>] key to alter the coding.
10. Select the menu item -activated- using the [down arrow]/[up arrow] key.
11. Press the [>>] key (coding).

Note: The parking aid is now activated for the respective seat position.

Selecting Door Mirror To Be Lowered, Left/Right

Note: The door mirror (left/right) can be adjusted with the PST 2 only.

1. Connect the PST2 with the ignition off, then switch the ignition on.
2. Switch on the PST2 and wait for the start-up screen.
3. Press the [>>] key to the next level.
4. Select the vehicle type 911 Turbo (996) in the left-hand window using the [down arrow] key.
5. Press the [-->] key to activate the right-hand window.
6. With the [down arrow]/[up arrow] key, select the Seat memory control module and press the [>>] key to the next level.
7. Select the menu item -Parking aid on door mirror- using the [down arrow]/[up arrow] key.
8. Press the [>>] key to the next level.
9. Select the desired door mirror -right- or -left- using the [down arrow]/[up arrow] key.
10. Press the [F8] key (coding).

Note: The selected door mirror is now activated.

Adjusting The Lowering Angle For The Passenger Door Mirror

Note: The lowering angle of the passenger door mirror can be adjusted with the PST 2 only.

1. Connect the PST2 with the ignition off, then switch the ignition on.
2. Switch on the PST2 and wait for the start-up screen.
3. Press the [>>] key to the next level.
4. Select the vehicle type 911 Turbo (996) in the left-hand window using the [down arrow] key.
5. Press the [-->] key to activate the right-hand window.
6. With the [down arrow] key, select the Seat memory control module and press the [>>] key to the next level.
7. With the [down arrow] key, select Modify coding and press the [>>] key to the next level.
8. Select the menu item -Lowering- using the [down arrow]/[up arrow] key.
9. Press the [>>] key to alter the coding.
10. Adjust the lowering angle using the [down arrow]/[up arrow] key.
11. Press the [F8] key (coding).

Note: The lowering angle is now set.

Deactivating The Parking Aid With PST 2
1. Connect the PST2 with the ignition off, then switch the ignition on.
2. Switch on the PST2 and wait for the start-up screen.
3. Press the [>>] key to the next level.
4. Select the vehicle type 911 Turbo (996) in the left-hand window using the [down arrow] key.
5. Press the [-->] key to activate the right-hand window.
6. With the [down arrow] key, select the Seat memory control module and press the [>>] key to the next level.
7. With the [down arrow] key, select Modify coding and press the [>>] key to the next level.
8. With the [down arrow]/[up arrow] key, select the menu item -Parking aid for position 1, -Parking aid for position 2- or -Parking aid for position 3-.
9. Press the [>>] key to alter the coding.
10. Select the menu item -deactivated- using the [down arrow]/[up arrow] key.
11. Press the [F8] key (coding).

Note: The parking aid is now deactivated for the respective seat position.


pro multis · About Operation CHARM