Rear

Installing Rear Air Ducts





1. Push air duct (brake-air spoiler) onto the lower rear axle control arm from the front.
- Subsequently fit the retaining clip -2- (included in the scope of delivery) from the rear. The retaining clip -2- must be inserted into the slot of the air duct -arrow- at the top.
- Connect the retaining clip -2- to the air duct -1-, For this purpose, push the three expansion rivets -3- (included in the scope of delivery) into the bores drilled in the bracket and the air duct (two from above and one from behind).

Note





^ The illustration shows the rear of the air duct -1- (removed)!
^ The left and right air duct -1- and retaining clip -2- differ from each other!

2. Mount the air duct in the same manner on the other side of the vehicle.