Removing and Installing Transmission Oil Pump - GT2

347219 Removing and Installing Transmission Oil Pump - GT2



Tools






Removing Transmission Oil Pump

1. Remove transmission oil cooler.

2. Unscrew the fastening screws of the oil pump -A-






3. Fasten the shop-made removal tool to the oil pump thread -B- with and M6 x 25 screw and drive the oil pump out of the transmission housing with gentle taps with a hammer on the shop-made removal tool.

Installing Transmission Oil Pump

1. Grease the sealing rings of the transmission oil pump, e.g. with Liqui-Moly.

2. Drive the transmission oil pump carefully into the transmission housing with a rubber hammer.

3. Screw in the fastening screws between the transmission oil pump and the transmission housing.

Tightening Torque: 23 Nm (17ft lbs.)

4. Fit the transmission oil cooler.


Tightening Torques