Fault Code 7

Fault, Fault code 7

Calibration not carried out yet

Possible causes, elimination, notes
This fault is stored in the following case:
1. A newly installed control module has not be calibrated yet

Elimination:
- Select menu item Calibration.
- Follow instructions on the screen and carry out the calibration

NOTE: Calibration is not possible if the sensor voltage lies outside the plausible range (sensor voltage less than 2 V or greater than 3 V).

- Check the sensor voltages in menu item Actual values, with the vehicle parked on a level surface (vehicle not raised)
- Check sensor holder and linkage