Removing and Installing Torque-Converter Sealing Ring

Removing and installing torque-converter sealing ring








Tool

Notes on removal and installation

Removal





1. Remove transmission and converter.
2. Remove sealing ring with special tool VW 681. Place the special tool directly behind the sealing lip of the sealing ring so that the mounting-face ring is not damaged.

Installation





1. Replace mounting-face ring if damaged.
1 Torque converter
2 Sealing ring
3 Mounting-face ring





2. Thinly coat circumference and sealing lip of sealing ring with Vaseline and drive sealing ring home as far as the mounting face with special tool 3295.