Disassembling Output Shaft

Disassembling output shaft

Overview





No. Designation Qty.
1 Adjusting shim S4 X
2 Adjusting shim S5 X
3 Bearing inner race 1
4 Four-point bearing 1
5 Bearing inner race 1
6 Cylindrical-roller bearing 1
7 Output shaft 1

Disassembling shaft
1. Remove adjusting shims (nos. 1 and 2 in overview) from shaft. Note the quantity and thickness for reinstallation.





2. Press cylindrical-roller bearing (no. 6 in overview) off with bearing inner race (nos. 5 and 3 in overview) and four-point bearing (no. 4 in overview).