Fault Code 10

Fault Code 10

Closing aid micro switch locked, Signal implausible

Diagnostic conditions
- Ignition on
- Targa rear window first locked and then unlocked

Possible cause of fault
- Short circuit to ground/open circuit between the micro switch "locked" and the control module
- Micro switch "locked" in the closing aid defective

NOTE:
- The status of the three micro switches in the closing aid for the Targa rear window can be read out in the menu item "Input signals" under Closing aid switch I to III.
- There are 3 microswitches in total in the closing aid module

Status of the closing aid micro switches







Affected terminals
Plug A, terminal 17

Diagnosis/troubleshooting