Fault Code 5024

Fault Code 5024

CAN Message Missing From Tiptronic

Diagnostic conditions
- Ignition on
- No CAN messages from the Tiptronic control module
- Short circuit to ground/voltage or open circuit in circuit to control module terminals 24, 40

Possible cause of fault
- CAN bus connection faulty
- Incorrect version coded
- Tiptronic control module faulty

Affected terminals
- Terminals 24, 40

Diagnosis/troubleshooting

NOTE:
- Before troubleshooting, read out the fault memory of the Tiptronic control module and eliminate any faults present.
- If the fault "39 CAN: DME communication disturbed" is present in the Tiptronic control module, there may be an open circuit in the CAN bus between the DME control module and the Tiptronic.





Work instructions