Fault Code 9112

Fault Code 9112

Tiptronic Control Module

Diagnostic conditions
- Ignition on

Possible cause of fault
- Due to a faulty component, the Tiptronic control module has switched off (limp-home) or Tiptronic control module is faulty
- Open circuit of CAN-high drive
- Open circuit of CAN-low drive

NOTE:
- The CAN drive bus is connected to the following control modules:
- DME
- Tiptronic
- PSM and steering angle sensor
- Instrument cluster

Affected terminals
- Plug A, terminals 15 and 31

Diagnosis/troubleshooting




Work instructions