Ambient Temperature Sensor / Switch HVAC: Service and Repair

Removing And Installing Outside Temperature Sensor

Removing outside temperature sensor

NOTE: Removing and installing outside temperature sensor on the installed heating/air-conditioning unit.

1. Remove footwell bulkhead and right air guide.
2. Remove drive motor for fresh-air/recirculation valve.
3. Pull off electrical plug connection on the outside temperature sensor.







4. Turn temperature sensor by -90 degree - and pull it out.


Installing outside temperature sensor
1. Place temperature sensor on the intake duct and turn by 90 degree (tighten).
2. Engage electrical plug connection and route wire carefully.
3. Install drive motor for fresh-air/recirculation valve and perform a function test.