Programming and Relearning

Setting Ahead The Total Mileage Counter In The Instrument Cluster

Setting ahead with the Porsche System Tester 2

NOTE: The kilometre reading must be set ahead after replacement of the instrument cluster:

1. Select vehicle type 911 Turbo (996)
2. Select control modules
3. Select instrument cluster
4. Select total mileage
5. Input Vehicle Identification Number
6. Confirm with F7 key
7. Input kilometre reading
8. Code with F8 key

The total mileage is adopted in the new instrument cluster after coding.

Setting hands-free microphone to the telephone type

NOTE: There is an adjustment possibility on the hands-free microphone for adapting it to the telephone system installed in the vehicle:







The following positions must be set:
- Position 1: Not used
- Position 2: Passive operation
- Position 3: Active operation

Setting

NOTE: The setting as delivered in new cars is position 3:

1. Carefully unclip hands-free microphone from the dashboard insert and pull out.
2. Use a small screwdriver to set the position of the installed telephone system (e.g. Position 3 PCM).
3. Carefully clip the hands-free microphone into the dashboard insert again.