Notes on Removal and Installation

Notes on removal and installation





^ Do not use commercially available steel valves. The Porsche valves (part nos. 993.361.073.00) are shorter (dimension X). -Dimension X- is approximately 43 mm for the Porsche version!
^ The complete valve only is available as a spare part.
^ The valve insert is commercially available!





^ The valve cap -1- is provided with a seal (air-tight seal). Do not confuse with a commercially available valve cap! The shaft of the fastening nut -2- must point towards the valve foot, because otherwise the valve will not be secure!





^ Position of the disc must be observed -3- -arrow-. If the disc is fitted incorrectly, the O-ring will be damaged -4-. Serious damage is possible as a result!