Procedures

Removing and Installing the Contact Unit

Removing

Removing Contact Unit:

1. Remove the steering wheel. Refer to "Removing and installing steering wheel".
Service and Repair

2. Undo and remove the panel.






3. Undo the -fastening screws- of the contact unit.
4. Pull forward and disconnect the electrical plug connections.
5. Remove the contact unit.

NOTE:
- To prevent unintended rotation of the contact unit (KE) when the steering wheel has been removed, the contact unit locks itself when the steering wheel is pulled back.
- Likewise, the contact unit unlocks automatically when the steering wheel is refitted.

Installing

1. Front wheels still unchanged in straight-ahead position.

Installing Contact Unit:

2. Ensure that the exact center position -(arrows)- of the contact unit is maintained.