Alternator Pulley / Clutch: Service and Repair

NOTE: The belt pulley can be undone or tightened using a standard commercially available tool.

Required tools:
- Double offset ring wrench a/f 24
- Screwdriver insert for internal serration screw a/f 10
- Cross handle and torque wrench

1. The hexagon nut a/f 24 must be countered with the ring wrench during tightening.
2. The shaft is tightened to the prescribed tightening torque of 65 ± 5 Nm (48 ± 3.5 ft.lbs) using the screwdriver insert and the torque wrench.