Differential Mount: Service and Repair

Removing and Installing Support For Front Wheel Drive




Component view


Removing the Support For Front Wheel Drive

1. Remove the final drive. Refer to Differential, Service and Repair.

2. Unscrew fastening screws and remove support.


Installing the Support For Front Wheel Drive





1. Mount support in correct position (angled side faces upwards)

2. Tighten the fastening screws in two stages
1 - Pre-tighten both screws to 5 Nm (3.5 ftlb.).
2 - Tighten both screws to 65 Nm (48 ftlb.).

3. Install the final drive.





Tightening Torques