Fluid - M/T: Service and Repair

Note: Top up only with approved transmission oil.

Filling capacity: 3.8 liters
Change quantity: 3.0 liters

1. Place oil collection pan under the transmission.





2. Unscrew the oil filler screw and drain plug and drain the oil with the vehicle horizontal.
3. Clean the drain plug and filler screw.
4. Replace sealing ring for drain plug and tighten to 30 Nm (22 ft. lbs.).
5. Fill with oil up to the bottom edge of the oil filler opening.
6. Tighten filler plug to 30 Nm (22 ft. lbs.).

Tightening torques
Location Thread Tightening torque Nm (ft. lbs.)
Filler plug for transmission oil M22 30 Nm (22 ft. lbs.)
Drain plug for transmission oil M22 30 Nm (22 ft. lbs.)