Fault Code 44

Fault Code 44

Driver-side release stuck

Diagnostic conditions
- Vehicle with version "safe position"
- Central locking changed from "safe position" to "unlocked position" by control

Possible cause of fault
- Alarm system control module incorrectly coded (country coding)
- "Save" servomotor cannot be controlled
- "Save" contact (micro switch) not connected to ground after release

Affected terminals
Plug A, terminals 5 and 29
Plug B, terminal 3

Diagnosis/troubleshooting

Diagnosis/troubleshooting (Part 1):

Diagnosis/troubleshooting (Part 2):