Fault Code 3

Fault Code 3

Axle position sensor, front (angle sensor for HBA)

Diagnostic conditions
- Ignition on
- Terminal 58 on

Possible cause of fault
- Short circuit to voltage/ground or open circuit in the supply leads between the control module and angle sensor for HBA, front
- The sensor linkage is disengaged or faulty
- Angle sensor for HBA, front, is faulty
- The control module is faulty

Affected terminals
Terminals 12, 14 and 17

Diagnosis/Troubleshooting

Diagnosis/troubleshooting (Part 1):

Diagnosis/troubleshooting (Part 2):