Fault Code 9114

Fault Code 9114

PCM2 timeout (if control module is coded)

Diagnostic conditions
- Ignition on

Possible cause of fault
- PCM2 is in production mode
- The PCM2 has switched off because of a faulty component or the PCM2 is faulty.

NOTE:
- The CAN Comfort is connected to the following control modules:
- Instrument cluster
- Air conditioning
- PCM2/CDR23

Affected pins
Instrument cluster plug A, pin 14 and pin 30 (CAN Comfort)

Air-conditioning control module plug B, pin 1 and pin 2 (CAN Comfort)

PCM2/CDR23 plug C, pin 1 and pin 2 (CAN Comfort)

Diagnosis/troubleshooting

Dianosis/troubleshooting: