Installation

Installation
1. Clean the levelling and centering surfaces on the brake disc and wheel hub. Then apply a very thin coat of Optimoly TA to the centering surface on the wheel hub.
2. Fit the brake disc.

Note:
^ Do not confuse right and left brake discs during assembly.
^ Distinguishing characteristic: involute shape and spare pail number (SP No.). The flat surface of the brake discs is marked with R = right or L = left.





^ Spare part on left-hand side - third group number is odd (SP No. Left brake disc: 996.352.405.00).
^ Spare part on right-hand side - third group number is even (SP No. Right brake disc: 996.352.406.00).

3. Adjust the parking brake shoes and parking brake cables.
4. Fit the brake caliper. Replace the brake caliper fastening screws after each removal. Tightening torque of the fastening screws = 85 Nm (63 ft. lbs.).