Removing and Installing Footwell Blower Outlet Sensor

Removing And Installing Footwell Blower Outlet Sensor

Removing footwell blower outlet sensor
1. Remove footwell bulkhead.
2. Unclip centre console cover at the front and remove the footwell vent (3 screws).







3. Turn blower outlet sensor by -90 degrees- and pull it out.
4. Pull electrical plug connection off blower outlet sensor.

Installing footwell blower outlet sensor
1. Position temperature sensor on the heating/air-conditioning unit housing and turn by 90 degrees (tighten).
2. Engage electrical plug connection and route wire carefully.