Procedures

Removing And Installing Bulb For Interior Light

Removing bulb for interior light
1. Pull the -interior light- out of the trim panel carefully from the front.







2. Remove bulb for reading light. Disengage the bulb socket (bayonet lock) and remove defective bulb.
3. Remove interior light. Carefully unclip the light lens on the switch side -arrow- and remove.







4. Remove defective bulb from between the contact springs.

Installing bulb for interior light
1. Insert new bulb for the reading light in the bulb socket and install (bayonet lock).
2. Insert the new bulb for the interior light into the holes of the contact springs and clip in the light lens.
3. Install interior light. First insert into the trim panel at the rear, then press upwards at the front and engage.
4. Carry out a function test for the reading light and interior light.