Removing and Installing Bulb For Auxiliary Headlight (High Beam Headlight)

Removing And Installing Bulb For Auxiliary Headlight (high Beam Headlight)







Removing bulb for auxiliary headlight

NOTE: The bulb for auxiliary headlights (high beam headlight/headlight flasher) is located beneath the gas discharge lamp for dipped beam/high beam headlight:

1. Switch off light. Remove main headlight.
2. Unscrew fastening screws (2 ea.) and open rear closure cap. Unscrew bulb for the auxiliary headlight (bayonet lock).
3. Release and disconnect electrical connection of the defective bulb.

Installing bulb for auxiliary headlight

1. Engage electrical plug connection. Install new bulb and ensure that it is correctly seated.
2. Close cap and secure with fastening screws.
3. Install main headlight and perform a function test.