Installing the Lid For Front Wheel Drive
Installing the lid for front wheel driveInstall in reverse order, observing the following points:
1. Fit sealing ring without twisting and coat it with Vaseline.
2. Fit lid carefully and tighten screws uniformly in diagonally opposite sequence. Use centering pins 9321 as an assembly aid.
Tightening torque: 25 Nm (18 ft. lbs.)
A Centering pins 9321
3. Always replace the snap ring for the halfshaft flange. To do this, clamp the flange in the vice with protective jaws and press out the snap ring with the new snap ring -A-.
A New snap ring
4. Grease the snap ring well and install the halfshaft flange with the special tools pull-in tool and extractor P 254 and pressure pieces (4 items) 9247.
5. Fill in oil.