Removing and Installing Spray Nozzle For Headlight Washing System

Removing And Installing Spray Nozzle For Headlight Washing System

Removing spray nozzle for headlight washing system
1. Remove and install cover for spray nozzle
2. Remove main headlight.







3. Undo the upper fastening screw (Torx T 20) on the retaining bracket.
4. Unclip lower fastening and remove retaining bracket.
5. Hold the rubber seal in the headlight housing and pull the spray nozzle out of the headlight housing.

Installing spray nozzle for headlight washing system
1. Install the spray nozzle in the headlight housing.
2. Make sure that the rubber seal is correctly seated on the spray nozzle and in the headlight housing.
3. Clip in retaining bracket and tighten.
4. Install main headlight.
5. Insert cover with spray nozzle head into the spray nozzle and press down firmly until it comes into contact with the headlight lens.
6. The cover with spray nozzle head must audibly engage.
7. Perform a function test.