Test Point 14

Test point 14
Right door secured but not locked

Fault code 14
1. Pull off plug I on the alarm control module.
2. Disconnect the plug connection X 12 (passenger's side).
3. Check the lead from the alarm control module plug I pin 32 to the door lock module for short to ground.
- Ohmmeter at alarm control module plug I pin 32 and ground
Display: Infinity Ohms

4. Check passenger's side door lock module switch contact.
- Ohmmeter at plug connection X 12 pin A5 (sleeve side) and ground.
Door locked.
Display: Infinity Ohms

Door not locked
Display: < 5 Ohms