Fault Code 5527
Fault Code 5527
Transfer Via CAN Not Possible
Diagnostic conditions
- Ignition on
Possible cause of fault
- Open circuit in CAN drive between PSM and connection point 135 or 136
- 'High' and 'Low' swapped at at least one point in the CAN drive
- All control units (PSM excepted) connected directly to the CAN drive for the PSM are faulty or disconnected
- PSM control unit faulty
Affected pins
Pin 24 and pin 40
Diagnosis/troubleshooting for vehicles with manual transmission
Work Instruction 1 - 2:
Work Instruction 3 - 5:
NOTE: Before troubleshooting, read out the fault memory of the DME and instrument cluster and remedy any faults present.
Diagnosis/troubleshooting for vehicles with Tiptronic transmission
Work Instruction 1 - 6:
NOTE: Before troubleshooting, read out the fault memory of the DME, Tiptronic and instrument cluster, and remedy any faults present