Fault Code 58

Alarm system I32; 148

Fault code 58

No current in tank servomotor despite relay actuation

Diagnostic conditions
- Central locking system actuated to "safe" or "locked"

Possible cause of fault
- Short circuit to ground/open circuit in wiring between the switching element for the filler flap and the alarm system control module
- Open circuit in wire between ground point 7 and alarm system control module
- Switching element for filler flap faulty
- Control module faulty

Affected terminals
Plug B, pins 1, 5 and 10

Diagnosis/troubleshooting

Part 1:

Part 2: