Test Point 2

TEST POINT 2
Door Lock Barrel Closed, Activated Longer Than 60 Seconds

Fault Code 02

Note:
This fault can also be caused by incorrect operation (door lock actuated towards "Closed" direction for longer than 60 seconds).

Procedure

1. Pull off plug I at the alarm control unit.

2. Disconnect plug connection X 11 (driver's side).

3. Disconnect plug connection X 12 (passenger's side).

4. Check the lines from the alarm control unit plug I, pin 35, to the door lock modules for ground shorts.

Ohmmeter at the alarm control unit plug I, pin 35, and ground

Display: infinity

5. Check the driver's side door lock module switch contact.

Ohmmeter at plug X 11, pin A4 (sleeve side) and ground.

- Door lock not actuated.

Display: infinity

- Door lock actuated towards "Closed".

Display: < 5 ohms

6. Check the passenger's side door lock module switch contact.

Ohmmeter at plug X 12, pin A4 (sleeve side) and ground.

- Door lock not actuated.

Display: infinity

- Door lock actuated towards "Closed".

Display: < 5 ohms