Test Point 13

TEST POINT 13
Left Door Secured But Not Locked

Fault Code 13

Procedure

1. Pull plug I off the alarm system control module.

2. Disconnect plug connection X 11 (driver's side).

3. Check the wire from the alarm system control module plug I pin 30 to the door lock for short to ground.

Ohmmeter at alarm system control module plug I, pin 30 and ground

Display: infinity

4. Check driver's side door lock switch contact.

Ohmmeter at plug connection X 11, pin A3 (sleeve side) and ground

- Door locked

Display: infinity

- Door not locked

Display: < 5 ohms