Test Point 14

TEST POINT 14
Right Door Secured But Not Locked

Fault Code 14

Procedure

1. Pull plug I off the alarm system control module.

2. Disconnect plug connection X 12 (passenger's side).

3. Check the wire from the alarm system control module plug I, pin 32 to the door lock for short to ground.

Ohmmeter at alarm system control module plug I, pin 32 and ground

Display: infinity

4. Check passenger's side door lock switch contact.

Ohmmeter at plug connection X 12, pin A3 (sleeve side) and ground

- Door locked.

Display: infinity

- Door not locked.

Display: < 5 ohms