Fault Code 2

FAULT CODE 2
motor Circuit, Right

This fault is stored in the following cases:
1. Short circuit to ground or open circuit in the circuit between control module and servomotor for HBA, right, terminals 5, 6, 7, 8
2. Servomotor for HBA, right, is faulty
3. The control module is faulty

Fault Effect: No automatic adjustment possible

Elimination:

- Switch off ignition

- Pull plug off the control module

- Pull plug off the servomotor for HEA

- Check for open circuit in the supply leads to the servomotor for HBA, right, terminals 5, 6, 7, 8

Ohmmeter display: < 5 ohms

- Check for short to B+ in the supply leads to the servomotor for HBA

- Ohmmeter connected to terminals 5, 6, 7, and 8; measure resistance ro ground

Display: infinity

- Check for short circuits between the leads.

- If no fault is detected in the wires, replace the servomotor for HBA.