Fault Code 24
Fault Code 24
Supply Voltage (Terminal 15) - Voltage Too High/Too Low
Diagnostic conditions
- Ignition on
- No control unit fault stored
Possible cause of fault
- Battery positive voltage too low
- Generator faulty
- Air-conditioning system regulator faulty
Affected pins
Plug D, pin 7, pin 9 and pin 15
Diagnosis/troubleshooting
Work Instruction 1 - 5:
NOTE:
- Erase the fault memory before troubleshooting and perform a test drive.
- If the fault is recorded again, commence troubleshooting.