Operation CHARM: Car repair manuals for everyone.
Home >> Porsche >> 2004 >> Boxster (986) F6-2.7L >> Repair and Diagnosis >> A L L Diagnostic Trouble Codes ( DTC ) >> Testing and Inspection >> Manufacturer Code Charts >> Instrument Panel, Gauges and Warning Indicators >> Fault Code 9101

Fault Code 9101



Fault Code 9101

CAN Drive Bus

Diagnostic conditions
- Ignition on

Possible cause of fault
- Short circuit between the two CAN leads (CAN-high and CAN-low)
- Short circuit between CAN-high (drive) and ground
- Short circuit between CAN-low (drive) and voltage
- A faulty control unit connected to CAN drive bus

NOTE:
The CAN drive bus is connected to the following control units:
- DME
- Tiptronic
- PSM and steering angle sensor
- Instrument cluster

NOTE: The plug connections of control units connected to the CAN drive bus are disconnected for trouble shooting. This has the effect that additional CAN relevant fault codes such as "9110 DME control unit" are stored in the fault memory of the instrument cluster. These fault codes should be initially ignored and should be deleted on completion of the troubleshooting.

Affected pin
Instrument cluster connector A, pin 15 and pin 31

Diagnosis/Troubleshooting


Work Instruction 1 - 6:




pro multis · About Operation CHARM