Fault Code 9114

Fault Code 9114

PCM2 Timeout (If Control Unit Coded)

Diagnostic conditions
- Ignition on

Possible cause of fault
- PCM2 in production mode.
- Due to a faulty component, the PCM2 system has switched off or is faulty.

NOTE:
The CAN Comfort is linked to the following control units:
- Instrument cluster
- Air conditioning
- PCM2/CDR23

Affected pin
- Instrument cluster plug A, pin 14 and pin 30 (CAN comfort).
- Air conditioning control unit plug B, pins 1 and 2 (CAN comfort).
- PCM2/CDR23 plug C, pins 1 and 2 (CAN comfort).

Diagnosis/Troubleshooting

Work Instruction 1 - 4: