P0122

P0122

Accelerator Pedal Potentiometer 1 - Below Limit

Diagnosis conditions
- Ignition on (approx. 30 sec.)
- Battery positive voltage greater than 7 V

Possible fault cause
- Short circuit to ground
- Pedal sensor

Affected terminals
Terminal IV/8

NOTE:
- The system operates in pedal sensor standby mode, i.e. the angle of the accelerator pedal is calculated from the residual position sensor signal.
- The maximum pedal value is limited to 30 %.
- The dynamic is limited.

Diagnosis/Troubleshooting