P0725

P0725

46, Rpm Limiter

Diagnosis conditions
- ATF level OK
- Selector lever position 'D' or 'M'
- Test drive

Possible fault cause
- Engine speed > 7648 rpm
- No or incorrect rpm signals from the DME control module
- ATF level too low or too high
- Impermissible downshifts of the transmission
- Hydraulic control unit is faulty


Diagnosis/troubleshooting

DANGER: Danger of scalding by hot ATF.

Hot ATF can cause burns if it comes into contact with the skin or clothing.
- Drain ATF only when cold.
- Wear suitable protective clothing.

Work Instruction 1:

Work Instruction 2 - 6: